Data Logging

Products listing

Displaying 1 to 12 (of 12 products)

Result Pages: 1

	Sort products descending by Model/SKU Model/SKU+	Sort products ascending by Product Name Product Name	Sort products ascending by Price Price	Add to Cart
iButton Read head with Led	Click to goto product details. 003-0291-CZ-2-S	iButton probe with bicolour LED CZ-2-S xxx chromium-plated, metal casing & waterproofiButton probe with bicolour LEDmetal casingall chrome-plated steelstandard wire ` 40 cmjoining colours green and red we get orangewaterproofnot suitable for hard environmental conditions (we suggest using stainless steel readers) Warranty 1 Year" Click to goto product details iButton Read head with Led	$17.80
Blue Dot - RJ11 Dual iButton Retainer	Click to goto product details. 003-0291-DS1402D-DR8	DS1402D-DR8 - Dallas 5mm "Blue Dot" RJ12 Dual iButton RetainerThe DS1402D-DR8 is a part of the DS1402 series. It is a 1-Wire network cable designed to connect any Serial RS232 or USB (purchased separately) 1-Wire port adapter that has a RJ11 jack with up to two iButtons simultaneously. The DS1402D-DR8 Blue Dot receptor cable can touch any iButton for reading, but can only retain the F5 version iButtons. The DS1402 series incorporates four basic types of connectors, 1-Wire RJ-11, iButton, Touch-and-Hold Probe, and Blue Dot Receptor. The DS1402 series of 1-Wire network cables provides connectivity for iButtons. The cables are designed to connect any USB, serial, or parallel port 1-Wire adapter to any iButton.The DS1402BR8 is the only cable that connects to the DS1401 iButton Holder. Applications of the DS1402-series 1-Wire network cables range from software protection and access control to asset management and thermal monitoring through handheld computers. Features Coiled cable for connecting iButtons to 1-Wire networks (8 ft when fully extended). and more." Click to goto product details Blue Dot - RJ11 Dual iButton Retainer	$28.75
Thermochron iButton - approx. 2048 sample reads (-40C to +85C )	Click to goto product details. 003-0291-DS1921G	DS1921G - Dallas 5mm Thermochron iButton - 2000 readsThe DS1921G Thermochron® iButton® is a rugged, self-sufficient system that measures temperature and records the result in a protected memory section. The recording is done at a user-defined rate, both as a direct storage of temperature values as well as in the form of a histogram. Up to 2048 temperature values taken at equidistant intervals ranging from 1 to 255 minutes can be stored. The histogram provides 63 data bins with a resolution of 2.0°C. If the temperature leaves a user-programmable range, the DS1921G will also record when this happened, for how long the temperature stayed outside the permitted range, and if the temperature was too high or too low. An additional 512 bytes of read/write NV memory allow storing information pertaining to the object to which the DS1921G is associated. Data is transferred serially via the 1-Wire protocol, which requires only a single data lead and a ground return.Every DS1921G is factory-lasered with a guaranteed unique electrically readable 64-bit and more." Click to goto product details Thermochron iButton - approx. 2048 sample reads (-40C to +85C ) ( Stock is very low or ordered direct from the manufacturer. Available on back order)	$41.80
Thermochron iButton - approx. 8000 sample reads (+15C to +145C )	Click to goto product details. 003-0291-DS1922E	DS1922E - Dallas 5mm Thermochron iButton - 8000 readsThe DS1922L/T/E temperature logger iButtons® are rugged, self-sufficient systems that measure temperature and record the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings taken at equidistant intervals ranging from 1s to 273hrs can be stored. In addition to this, there are 512 bytes of SRAM for storing application-specific information and 64 bytes for calibration data. A mission to collect data can be programmed to begin immediately, or after a user-defined delay or after a temperature alarm. Access to the memory and control functions can be password protected. The DS1922L/T/E is configured and communicates with a host computing device through the serial 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1922L/T/E is factory-lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel and more." Click to goto product details Thermochron iButton - approx. 8000 sample reads (+15C to +145C ) ( Stock is very low or ordered direct from the manufacturer. Available on back order)	$136.40
Thermochron iButton - approx. 8000 sample reads ( -40C to +85C )	Click to goto product details. 003-0291-DS1922L	DS1922L - Dallas 5mm Thermochron iButton - 8000 readsThe DS1922L/T temperature logger iButtons® are rugged, self-sufficient systems that measure temperature and record the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings taken at equidistant intervals ranging from 1s to 273hrs can be stored. In addition to this, there are 512 bytes of SRAM for storing application-specific information and 64 bytes for calibration data. A mission to collect data can be programmed to begin immediately, or after a user-defined delay or after a temperature alarm. Access to the memory and control functions can be password protected. The DS1922L/T is configured and communicates with a host computing device through the serial 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1922L/T is factory-lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel package is and more." Click to goto product details Thermochron iButton - approx. 8000 sample reads ( -40C to +85C ) ( Stock is very low or ordered direct from the manufacturer. Available on back order)	$80.30
Thermochron iButton - approx. 8000 sample reads ( 0C to +125C )	Click to goto product details. 003-0291-DS1922T	DS1922T - Dallas 5mm Thermochron iButton - 8000 readsThe DS1922L/T temperature logger iButtons® are rugged, self-sufficient systems that measure temperature and record the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings taken at equidistant intervals ranging from 1s to 273hrs can be stored. In addition to this, there are 512 bytes of SRAM for storing application-specific information and 64 bytes for calibration data. A mission to collect data can be programmed to begin immediately, or after a user-defined delay or after a temperature alarm. Access to the memory and control functions can be password protected. The DS1922L/T is configured and communicates with a host computing device through the serial 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1922L/T is factory-lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel package is and more." Click to goto product details Thermochron iButton - approx. 8000 sample reads ( 0C to +125C ) ( Stock is very low or ordered direct from the manufacturer. Available on back order)	$108.70
Temperature & Humidity iButton (approx. 4000 sample reads for Temp + approx. 4000 for Humidity)	Click to goto product details. 003-0291-DS1923	DS1923 - Dallas 5mm Temperature and Humidity iButtonThe DS1923 temperature/humidity logger iButton® is a rugged, self-sufficient system that measures temperature and/or humidity and records the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings taken at equidistant intervals ranging from 1s to 273hrs can be stored. In addition to this, there are 512 bytes of SRAM for storing application-specific information and 64 bytes for calibration data. A mission to collect data can be programmed to begin immediately, or after a user defined delay or after a temperature alarm. Access to the memory and control functions can be password protected. The DS1923 is configured and communicates with a host-computing device through the serial 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1923 is factory-lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel and more." Click to goto product details Temperature & Humidity iButton (approx. 4000 sample reads for Temp + approx. 4000 for Humidity) ( Stock is very low or ordered direct from the manufacturer. Available on back order)	$136.40
iButton DB9 Serial RS232 to RJ11 Adapter Dongle	Click to goto product details. 003-0291-DS9097U	DS9097U - Dallas iButton DB9 to RJ12 Serial port adapterThe DS9097U communicates with 1-Wire devices at regular speed as well as Overdrive speed. The serial port must support a data transmission rate of 9600bps. Under software control, the adapter can be set up for RS232 data rates of 19200, 57600, and 115200bps. The two higher rates are recommended for communication at Overdrive speed with Overdrive capable devices. Since the DS9097U operates in a byte mode, every data byte received from the RS232 port generates eight time slots on the 1-Wire line. At 19200bps data rate the DS9097U-E25 is already faster than the DS9097 (E) at 115200bps.Note that there are some COM ports that use signal levels of less than (±)5V. The DB-9 versions of this adapter will not work with such ports. The DS9097U-E25 adapter, however, will function in most cases if external power is supplied. Without EPROM programming, the external power may be anywhere in the range of 6V to 9V. For EPROM programming the voltage must be at 12V in any case. Before using an externally powered and more." Click to goto product details iButton DB9 Serial RS232 to RJ11 Adapter Dongle ( Stock is very low or ordered direct from the manufacturer. Available on back order)	$53.80
F5 iButton Size Waterproof Enclosure	Click to goto product details. 003-0291-DS9107	Dallas 5mm Temperature Logger EnclosureThe iButton® Capsule is a mechanical enclosure to protect Temperature Logger iButtons (DS1921 and DS1922 series) from moisture, solvents and pressure. The device consists of a base with the cavity for a F5 iButton, a screw-in plug with O-ring to seal the enclosure, and a top with two stainless-steel screws to mount the iButton Capsule to a cable, e.g., to measure temperature at different levels within a liquid. The cable is inserted into the notch of the plug where it is held in place by the matching protrusion of the top piece.Base, plug, and top are made of polyphenylene sulphide (PPS). This material is chosen for its mechanical properties (remains stable during both long and short-term exposure to high temperatures), inherent flame resistance, and outstanding chemical resistance (inert to steam, strong bases, fuels and acids). Although PPS is virtually insoluble below 200°C, it can be attacked by chlorinated hydrocarbons. The silicone O-ring matches the temperature and chemical qualities of the PPS. In addition, it and more." Click to goto product details F5 iButton Size Waterproof Enclosure ( Stock is very low or ordered direct from the manufacturer. Available on back order)	$49.75
iButton F5 Size Holder - USB to iButton Receptacle/Dongle	Click to goto product details. 003-0291-DS9490B	DS9490B - Dallas iButton F5 Holder - USB to RJ12 adapterThe DS9490B is a USB bridge and holder for a single F5-size iButton. The iButton is securely held behind a latched door. This adapter is based on the DS2490 USB to 1-Wire bridge chip. Features High-Speed 12Mbps Universal Serial Bus (USB) Interface Supports Standard and Overdrive 1-Wire® Communication Slew-Rate-Controlled 1-Wire Timing and Active Pull-up for Improved 1-Wire Network Performance DS9490R has an RJ11 Interface for Standard Connectivity Accessories such as the DS1402D-DR8 DS9490B has an iButton® Interface and Retains a Fixed iButton Built-In Custom DS2401 Identification Chip Reads all 1-Wire and iButton Devices. Writes All Except EPROM 1-Wire/iButton Devices Warranty 1 Year" Click to goto product details iButton F5 Size Holder - USB to iButton Receptacle/Dongle ( Stock is very low or ordered direct from the manufacturer. Available on back order)	$49.75
iButton USB to RJ11 Adapter Dongle	Click to goto product details. 003-0291-DS9490R	DS9490R - Dallas iButton USB to RJ12 adapterThe DS9490R is a USB bridge with 1-Wire RJ11 interface to accommodate 1-Wire receptacles and networks. This adapter is based on the DS2490 USB to 1-Wire bridge chip. Features High-Speed 12Mbps Universal Serial Bus (USB) Interface Supports Standard and Overdrive 1-Wire® Communication Slew-Rate-Controlled 1-Wire Timing and Active Pull-up for Improved 1-Wire Network Performance DS9490R has an RJ11 Interface for Standard Connectivity Accessories such as the DS1402D-DR8 DS9490B has an iButton® Interface and Retains a Fixed iButton Built-In Custom DS2401 Identification Chip Reads all 1-Wire and iButton Devices. Writes All Except EPROM 1-Wire/iButton Devices Warranty 1 Year" Click to goto product details iButton USB to RJ11 Adapter Dongle ( Stock is very low or ordered direct from the manufacturer. Available on back order)	$53.80
iButton Read head with Led	Click to goto product details. 003-0291-ML9092T	Reader ML9092T Panel mount with LEDThe Touch and Hold Probe is designed to accept the iButton and hold it for as long as is necessary for the reading process. It is made of three ABS injection-molded parts: the main housing and two covers. These three components are held together with stainless steel screws and nuts. Warranty 1 Year" Click to goto product details iButton Read head with Led	$21.70